WFC G800L aXe products

To use these calibration products with aXe, copy them into a directory and set your AXE_CONFIG_PATH environment variable to point to that directory.

Important Notes:

• These products are meant to be used together. The WFC sensitivity files available here are valid for extracted spectra which have been flat-fielded using the included flat-fielding cube.
  Information about the flat-fielding cube can be found at http://xxx.lanl.gov/abs/astro-ph/0212021.
  Information about the field dependence and wavelength calibration can be found here
  Information about the sensitivity calibration can be found here
  
• Routine calacs processing now corrects for the gain for all G800L grism exposures. The _FLT.fits files, which should be used for aXe extraction, are in electrons.

The aXe pages contain the latest version of aXe as well as sample test data and a sample script to perform the extraction

aXe Downloadable files

The sensitivity files were last updated Jan 2008 and are applicable to all data taken so far. Details can be found in this Instrument Science Report.


• aXe master sky image for WFC G800L CHIP1: ACS.WFC.CHIP1.msky.1.fits
• aXe master sky image for WFC G800L CHIP1: ACS.WFC.CHIP2.msky.1.fits
• aXe configuration file for WFC G800L CHIP1: ACS.WFC.CHIP1.Cycle13.4.conf
• aXe configuration file for WFC G800L CHIP2: ACS.WFC.CHIP2.Cycle13.4.conf
• aXe flat-field cube for WFC G800L CHIP1: WFC.flat.cube.CH1.2.fits
• aXe flat-field cube for WFC G800L CHIP2: WFC.flat.cube.CH2.2.fits
• aXe WFC G800L sensitivity curves:
  ACS.WFC.1st.sens.7.fits for 1st order (ASCII version)
  ACS.WFC.2nd.sens.6.fits for 2nd order
  ACS.WFC.3rd.sens.2.fits for 3rd order
  ACS.WFC.-1st.sens.2.fits for -1st order
  ACS.WFC.-2nd.sens.2.fits for -2nd order
  ACS.WFC.-3rd.sens.2.fits for -3rd order
  ACS.WFC.0th.sens.2.fits for 0th order
  
  
• All of the above in one large tar.gz file (287 MBytes): ACS.WFC.calib.6.tar.gz


• Information about aperture corrections is provided in this table which shows flux versus extraction aperture half-width for the G800L grism for the ACS/WFC G800L (1st order), relative to the default aperture half-width of 0.5 arcsec. The corrections are listed for five different wavelength ranges.

Maintained by Harald Kuntschner <hkuntsch@eso.org>
Last Modified Mon, 04 Feb 2008 10:45:30 +0100